Sign In to join the community | Help
Electrical

Hampton Bay 52" Redington III

The 4 bulb light kit on the fan, one bulb isn't working. I have replaced the bulb, still not working. Any ideas?   
Not what you were looking for ? Try posting a question
Posted 2017-11-10T19:11:48+0000  by nancyfl nancyfl
 
Hello nancyfl.  Welcome to the Community!

While it is possible that the wiring to just that one socket has come loose inside the light canopy cover, that is unlikely.  More likely is that the center contact in that one socket has been pushed back to the point that a new bulb no longer makes contact.  You can test that with a meter if you are careful.

What I would do is shut off the power to the fan at the circuit breaker and use an angled pick to pry up that center contact just a bit.

If that does not work then you will have to take down the light kit and look at the inside to spot where power has been interrupted.

Chris.

.
Posted 2017-11-10T20:11:44+0000  by Chris_HD_CHI
 
Not what you were looking for ? Try posting a question

Topic
Categories+