Skill Level- Beginner
Under/Over Rating- Under $30/Over 30 min (does not include dry time)
Tools and Materials
Drill bit Drill
9- 24” pieces of ½” PVC pipe 6- 12” pieces of ½” PVC pipe 6- ½” PVC “T” (non- threaded) 9- ½” PVC 90◦ elbow (non- threaded)
Spray paint (at least 3 different colors) Nylon cord (2 different colors) 12 golf balls
Step 1- Cut your PVC using a ratcheting PVC cutter.
Step 2- Lay out your pieces and attach them together in this formation.
Step 3- Before you put it all together; paint all the “ladder” pieces a different color. This will make it easier to score.
Step 4- While your paint is drying, it’s time to make some golf ball bolos. Drill a hole through the golf ball as straight as you can. Going slow will make your life much easier.
Cut 6, 18” pieces of nylon cord, 3 in each color. Run each piece of cord through 2 golf balls and tie the knots as shown:
Step 5- After the paint has dried, put it together and it’s time to play!