Sign In to join the community | Help
Tools & Hardware

Answered

Bought Husky 20gal compressor, 1/4" access. kit, 1/4' hose...can't figure out how they connect

Not what you were looking for ? Try posting a question
Posted 2013-08-28T16:46:05+0000  by lampasas lampasas
 

Hello Lapasas,

 

Welcome to the community.

 

I put together a picture of how all of the pieces should be assembled so that they all connect correctly.

 

     Compressor hose connection.jpg

 

You will need to add either a male or female quick connect to the end of all accessories. The compressor comes with one already on it. Use Teflon thread tape on all threaded joints so that they will not leak.

 

Once you have all of the connectors on all you have to do is pull the outer sleeve back on the female quick connect and firmly push the other piece in and then while holding it in release the sleeve. It should lock into place. To release it just pull back the sleeve and the accessory/hose will disconnect. The part that you are disconnecting will be released with a little bit of force so be careful.

 

Please let me know if you have any other questions. I would love to help.

 

Best Answer

Posted 2013-08-28T19:44:38+0000  by Christine_HD_OC

THANK YOU SOOOOO MUCH! Now I can put my walls together.

Posted 2013-08-29T14:17:06+0000  by lampasas

Hello again.

 

Sorry for the delay. I’ve been out of the office working in my store.

 

You’re welcome. I’m glad to hear that you have things all straightened out and can move forward with your project.

 

You mentioned putting your walls together..??? What are you building?

 

I would love to hear more about your project or better yet see some pictures.

 

Let me know if you have any other questions. I would love to help.

 

Thanks again for joining the How-to Community. Were glad you’re here.

 

Posted 2013-09-11T20:29:13+0000  by Christine_HD_OC
 
Not what you were looking for ? Try posting a question

Topic
Categories+