Sign In to join the community | Help
Electrical

Hampton Bay Cameron II Fan Plus fan switch broken

light switch is fine, but chain for the fan is broken. Is the Westinghouse switch model model #775200 the right replacement? I can't turn the fan off! HELP!!
Not what you were looking for ? Try posting a question
Posted 2016-10-29T12:37:49+0000  by Toodles Toodles
 

Hi Toodles,


Thanks for your question and welcome to the community.


The Westinghouse ceiling fan speed switch you asked should be able to work for your Hampton Bay fan, it's linked here and shown below.




Overall, it's a fairly straightforward and simple replacement. Be aware though, that you will need to replace the wiring in the EXACT configuration as the old switch. So if a blue wire goes to the 1 position, then you'll need to place it exactly in that spot for the new.

of 

Take pictures or notes showing where the wiring setup is done on the existing bad switch, so you can successfully replace it with your new one. Be mindful to carefully insert the wires into the new switches as well as removing them from the old.


No cuts need to be made; use a small set of needle-nose pliers and a flattened piece of a paper clip is the best thing to guide the wire out of the old switch and into the new.


Let us know if you have any other questions,

Joseph

Posted 2016-10-29T15:24:54+0000  by Joseph_HD_ATL
 
Not what you were looking for ? Try posting a question

Topic
Categories+