Sign In to join the community | Help
Doors & Windows

How do I install the Charleston security door. Model # 650B36x80?

Not what you were looking for ? Try posting a question
Posted 2013-09-24T22:43:59+0000  by jc12 jc12
 

Hi JC12,

 

In most cases the door will mount directly to the exterior wall of your home. Security screws are supplied and holes for them must be drill through the exterior wood or stucco on your home.

 

The security doors are sized so the mounting bolts penetrate the stud frame of the doorway, This assures a solid and secure mounting so the door cannot be easily removed.

 

Position the door so it is properly centered on the door opening. Mark the location of the mounting holes in the frame.

 

Next remove the door from the opening and drill the mounting holes.

 

These holes should be 1/2 the diameter of the supplied bolts or less.

 

Now position the door in the opening and insert the mounting screws loosely, check for proper alignment of the door and that the door swings freely.

 

Tighten the bolts, check the alignment as you proceed.

 

Finally install you door handle and dead bolt lock.

 

Mike,

 

Posted 2013-10-03T18:52:29+0000  by Mike_HD_OC
 
Not what you were looking for ? Try posting a question

Topic
Categories+