Sign In to join the community | Help
Electrical

How to retread Homelite trimmer

Not what you were looking for ? Try posting a question
Posted 2013-06-16T15:58:45+0000  by VIRGINIA45 VIRGINIA45
 

Depending on your model...Here is basic instructions from the Homelite user manual.

 

STRING REPLACEMENT:


1. Stop engine. Hold string head and unscrew
spool retainer. Turn clockwise.


2. Remove spool from stringhead (Note: Keep      
spring (B) attached to spool). Remove any
old string remaining on spool.


3. Insert one 9 foot (2.7m) long string into anchor
hole (G) in spool as shown. Wind string #1, in
upper space counterclockwise as shown by
the arrows on the flange (H) and place string
end in slot (I) on upper spool flange . Extend
string 6 inches (152mm) beyond slot. After
winding, there should be at least 1/4" (6mm)
between the wound string and the outside
edge of the spool. DO NOT OVERFILL.


4. Repeat step 3 with #2 string and again DO
NOT OVERFILL.


5. Follow Spool Replacement instructions steps



 

twine.JPG

Posted 2013-06-16T16:50:49+0000  by Kevin_HD_ATL
 
Not what you were looking for ? Try posting a question

Topic
Categories+