Sign In to join the community | Help
Electrical

I'd like to know how to replace line to a Ryobi weed wacker model ZRP2002

Not what you were looking for ? Try posting a question
Posted 2013-08-03T18:42:07+0000  by Judith01 Judith01
 

Hey Judith01.

 

I see that you have the 18V Lithium ION trimmer. You can reload the old empty spool again with string. You will need to use the .065 lineon it, as anything larger would not work and just tangle. Once you snap the cap off, take out the empty spool.

 

You will want to start by anchoring the string into the small hole inside the spool. Once it is anchored, you will want to twist the line onto the spool in the direction of the arrows. To prevent tangling the line, be sure to wind the spool around the line, not the line around the spool.

 

Once the spool has a sufficient amount of line on it, you will cut the line but remain holding it tight. Now feed the end of the line into the hole of the dead, while holding the line tight while sliding the spool into place in the head. Once it is in just snap the cap back onto the head.

Ryobi One+ 18-Volt Lithium-ion Cordless String Trimmer/Edger

Posted 2013-08-04T15:02:21+0000  by Ingar_HD_ATL
 
Not what you were looking for ? Try posting a question

Topic
Categories+