Leyland Cypress, Cupressocyparis x leylandii

Common Name: Leyland Cypress

Type: tree

Family: Cupressaceae

Zone: 6 to 10     Find Your Zone

Height: 60 to 80 feet

Width: 15 to 20 feet

Sun exposure: full sun to partial shade

Soil: acidic, well drained

Leaves: evergreen

Fertilizer: Vigoro Tree, Shrub and Evergreen or Miracle Gro Evergreen Tree Spikes

Due to its very quick growth rate and its ability to create a big screen, Leyland cypress has become one of the most commonly used plants around. Leyland Cypress has proven to be tough as nails, with few problems. There is one disease that can seem to be problematic to the Leyland around times of drought but to this day, the Leyland Cypress still proves to be as tough as they come. You can read about this disease by clicking right here.

Green Giant Arborvitae would be a good alternative to the Leyland Cypress, seeing fewer potential problems down the road.

PLANTING GUIDE

STEP 1: Digging the hole

• Find a location that has suitable sun exposure for your particular type of plant.
• Dig your hole an inch or two shallower than the rootball of the plant.
• Dig the hole twice the diameter of the rootball.
• Scuff up the sides of the hole with a shovel to help roots break through the native soil.
  

STEP 2: Putting plant in hole

• When removing the plant from the pot, check to see if the roots were circling the pot.
• If the plant is rootbound, gently break up the roots with your hands until loosened up.
• Set plant level, in the center of the hole.
• Make sure the top of the rootball is just above soil level.

STEP 3: Amending the soil and filling in the hole

• Amend the soil with proper amendments for your soil type. 
  
• Incorporate 50% native soil with 50% amendment soils like garden soil, composted manure or soil conditioner.
• Make sure dirt clods are broken up or removed from hole along with rocks.
• Fill the hole with soils to the soil level and pack down. Do not cover top of rootball with dirt.
  
• Water in thoroughly to remove air pockets.

STEP 4: Mulching and fertilizing

• Cover the planting site with at least 2 inches of the mulch of your choice (pinestraw, cupress mulch,etc.)
• High Phosphorus root stimulator fertilizers like Quick Start from Miracle Gro are great to use at time of planting.
• When planting trees, a tree stake kit may be required to prevent the wind from blowing over or breaking our newly planted tree until it becomes established.

Find your closest local store

Related Articles:

15 Awesome Upright Evergreen Plants