Sign In to join the community | Help
Build & Remodel

Need to trim a Swanstone™ vanity top. Any suggestions?

Need to cut the wall side of a vanity top, 3/4 in the back to 1/2 in the front to make up for a bad wall and centering.  I never tried to cut this material and will only get one shot at it.  It is a Swantone™ solid surface vanity made by Swan Corporation of St. Louis, Missouri.

Not what you were looking for ? Try posting a question
Posted 2013-10-25T14:49:29+0000  by markMc markMc
 

You can use a circular saw with a 40-60 (the higher the number of teeth, the smoother the cut) tooth carbide blade.  If you don't want to free hand the cut, make a cut off jig similar to this one.

 

 

The nice thing about this type of jig is that the edge of the board is your line of cut.  Just clamp it in place.

Posted 2013-10-25T19:09:20+0000  by Adam444
 
Not what you were looking for ? Try posting a question

Topic
Categories+