Sign In to join the community | Help
Lumber & Composites

Tokyo floating bed revisited? I am looking for clarification on Paul's plan.

I am looking for clarification on the measurements used on this building plan. For example, the sides of the bed consist of a top 1x4x80 and a side 1x4x80 connected to another 1x6x80. The diagram shows 9 blocks that go in the side of the bed but the measurement for the block as diagramed is 4 inches wide. The top board has two boards flush at the end and with the top board measuring in actuality 3.5 minus the two .75 boards leaves only a 2 inch gap for the blocks to fill or am I missing something? Also the height of the boards for the plywood to sit in that the bed sits on us never given. I just want to make sure that I cut all the blocks correctly. If at all possible could someone put the real measurements down so I can best prepare what materials I will need for the project?
Not what you were looking for ? Try posting a question
Posted 2014-01-04T05:55:43+0000  by Firstimer Firstimer
 

 

original.jpg

original.jpg

original.jpg

Posted 2014-01-04T15:15:30+0000  by Firstimer
I downloaded the sketch up version and that answered my question. Thanks to those who looked.
Posted 2014-01-04T19:12:36+0000  by Firstimer
 
Not what you were looking for ? Try posting a question

Topic
Categories+