Sign In to join the community | Help
Heating & Cooling

hooking piggy back fuse box

I have a woodworking shop and need to hook up another breaker box,, Its a murray 100 amp box theres 2 bars on both sides of box  left side is hooked but right side bar is not is that the ground bar??  THX

Not what you were looking for ? Try posting a question
Posted 2012-08-19T16:11:24+0000  by woodworker035 woodworker035
 

Hi woodworker and thanks for your question.  That bar is most likely a ground bar but to be certain I would like to see a picture.  Are you able to up load a picture of the box.  Most 100 amp sub-boxes have a bar for the neutrals and a bar for the grounds because they must be separated if the power is origination from another box that the meter feeds.  I hope this helps.   Stukas

 

I am a Master Trade Specialist with the Home Depot

Posted 2012-08-20T16:52:12+0000  by Stukas

HIYA SIR,, THXX  so much for getting back to me,,, Ill try to send you a picture of the box im hooking up,,It,s a murray 125 amp indoor model no ,, lc1224l1125  thxxx  again     Freman

Posted 2012-08-21T15:07:09+0000  by woodworker035

Thanks for the pic Woodworker..   The bar on the left is for the ground wires (Bare or Green only).  The bar on the right is for the neutral wires (White only).  You must have a 4 wire feed to this box.  Also don't use the green bonding screw with this application.  Sorry it took me so long to get back to you.  I was on vacation last week.   I hope this helps.   Stukas

Posted 2012-08-27T20:01:13+0000  by Stukas

THXXX   much for your help,,  I do have 4 wire running into box  10-3  wire  thxxx  again

 

Posted 2012-08-28T21:11:48+0000  by woodworker035
 
Not what you were looking for ? Try posting a question

Topic
Categories+