12-04-2011 11:37 AM
I have a old Hampton Bay Flushmount Ceiling fan in a bed room. I want to remove it to replace it with a new one.
However after removing the light fixture and switches I can NOT find a way to remove the fan or fan motor from the ceiling fixture. The only screws are on the TOP of the fan housing 3" from the ceiling where I can NOT get a screwdriver.
Am I missing something??
12-05-2011 10:47 AM - edited 12-05-2011 12:30 PM
Good morning Thom,
Welcome to the community, let's talk about getting that old ceiling fan down...
Most flush-mount ceiling fans can be removed by following three simple steps shown in the images below...
Those screws located on top of the fan/motor housing are the ones that do hold the motor housing and hides the mounting brackets. But, make sure before this is removed that the blade brackets and any light kits that will prevent the fan housing from sliding down need to be taken down first.
Try these steps out Thom and please update us on how it goes!
I am a 12 year Home Depot Store Associate, trained and authorized to help people on the Internet.
12-07-2011 10:51 AM
Thanks but on my fan there are no screws visiable on the fan housing as illustrated in fig. #2. And NO I can NOT remove the beige ring from the housing near the ceiling.
12-07-2011 01:40 PM
Sorry you’re having such a hard time getting your fan down.
Good news is that you have most of the hard work done. I think the blade brackets are the most time consuming.
Now let’s help you get the rest of that fan down. Unfortunately the beige ring that won’t come off is the key. You have to get it off to get to the screws that hold the canopy on.
Most of them all you have to do is turn it a quarter turn and then it will fall down. Some just click on.
A lot of the time it gets stuck to the paint and you have to give it a little bit of help to come off.
If you still cannot get it off I have had to take a screw driver and a piece of thin wood (to protect the ceiling) and gave it a little push in between the ceiling and the beige piece to get it off. Most of the time it will just bow and pop off. Once you get it off you will see the screws that are holding the canopy on. Take it off to get to the fan bracket.
Here is a page from the instructions so you can see just how it is supposed to work.
I hope this gets your old fan down so that you can get a nice new fan installed.
Let me know if you have any other questions I would love to help.
"You can't do it if you don't try". Believe in yourself!! ______________________________________________________________________
I am a Home Depot Store Associate, trained and authorized to help people on the Internet.
08-15-2013 11:09 AM
My Hampton Bay Finishing Collar is secured by slightly screwing or twisting the collar onto the mounting screws. I tried to "Snap" the ring off as indicated and this broke the guides allowing the collar to fit securely. Please be careful if you are trying to 'Snap" the ring off.